UJI DATA KONFIGURASI METODE RESISTIVITAS (KONFIGURASI WINNER, DIPOLE-DIPOLE, POLE-DIPOLE) BERDASARKAN PENGUKURAN LAPANGAN DAN UJI LABORATORIUM

  • Muhammad Dayattullah
  • Supriyanto Supriyanto
  • Piter Lepong
  • Aditya Rinaldi

Abstract

Geoelectric Resistivity is one of the geophysical methods that utilize different electrical properties in the earth in the form of resistance type in rocks. In this research, was measurements on Kadrie Oening Street at Pulau Balang formation and measurement of laboratory scale resistivity at Electronic and Instrumentation Laboratory. From the field measurements, three configurations are used: Wenner Alpha, Dipole-Dipole and Pole-Dipole. From the three configurations, sandstone resistivity value between 11.93 W.m to 33.61 W.m, clay ranged between 3.86 W.m to 10.82 W.m, siltstone range between 4.80 W.m to 9.72 W.m, coal ranged between 83.88 W.m to 216.47 W.m. The resistivity data inversion shows that the Wenner Alpha and Dipole-Dipole configurations are more compatible with field conditions in displaying the slope of the coating than the Pole-Dipole configuration.

Published
2018-08-31
How to Cite
DAYATTULLAH, Muhammad et al. UJI DATA KONFIGURASI METODE RESISTIVITAS (KONFIGURASI WINNER, DIPOLE-DIPOLE, POLE-DIPOLE) BERDASARKAN PENGUKURAN LAPANGAN DAN UJI LABORATORIUM. GEOSAINS KUTAI BASIN, [S.l.], v. 1, n. 2, aug. 2018. ISSN 2615-5176. Available at: <https://jurnal.fmipa.unmul.ac.id/index.php/geofis/article/view/285>. Date accessed: 27 may 2024. doi: https://doi.org/10.30872/geofisunmul.v1i2.285.
Section
Articles

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.